Christ ALPHA C173 Kullanım Kılavuzu - Sayfa 2

Laboratuvar Ekipmanları Christ ALPHA C173 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Christ ALPHA C173 2 sayfaları.

Sayfayı Yazdır

TOUCH POS

Access to the operator menu (counters, configurations, chemistry, operator settings, wash cards, door control, time setting, display, network)

Step 1:

Press the window on the far upper right corner

and then on the far lower right corner (see

the "Login" window opens.

Step 3:

To proceed to the service menu, press

Step 4:

To proceed to the operator menu, press

ton.

TOUCH POS

Manual operation of the unit (drive unit, horizontal nozzle, horizontal brush, HP beam, lateral nozzles, lateral brushes, wheel brushes or Wabeg)

Step 1:

Click the window on the extreme upper right cor-

ner and then on the extreme lower right corner

(see

); the "Login" window opens.

Step 3:

To proceed to the service menu, press the

ton.

Step 5:

Select the required drive (drive unit, horizontal nozzle, horizontal brush, HP beam, lateral nozzles, lateral brushes, wheel brushes

or Wabeg) with

and confirm with

Info: Manual movement of the horizontal nozzle is possible only once it has moved into the starting position. For further information,

see the operation manual of the operation terminal.

Back with

Press the

button. The red text "Manual" switches off.

Step 6:

To leave the service menu, press the

TOUCH POS

Fault

If a fault occurs during the program, the program

stops in the sequence in which the fault occurred.

The machine stoppage is indicated on the window

(see figure).

Once all faults have been rectified, the programme

sequence can be cancelled with

with

Knowledge of the operation manual for the roll over wash unit and the operation terminal is required.

6502200-EN_00

26/05/21

);

button.

but-

button. Manual movement is now possible.

button.

or resumed

Technical modifications reserved!

Step 2:

Enter the access data in the window "Login" and

confirm with

button.

Step 5:

Input the 4-digit operator code and confirm with

button. To leave the operator menu again, re-

peatedly press

button.

For further information, see the operation manual of

the operation terminal.

Step 2:

Enter the access data in the window "Login" and

confirm with

button.

Step 4:

Press the

button.

The text "Manual" flashes red underneath the sta-

tus line.

Press the

button.

Carry out the fault rectification:

• Rectify the fault

• Acknowledge the fault rectification with

− The fault indication is reset.

For further information, see the operation manual of

the operation terminal.

Info: The vehicle can exit if an error that cannot be acknowledged without a

repair occurs during the programme. However, this is possible only when there

are no errors in the frequency converters and the drives, and the wash system

is set to manual operation (see "manual operation of the unit" in the operation

manual of the operation terminal).

Abridged operation manual

ALPHA C173

2 / 2