Dell E2210H - 22" LCD Monitor Kullanıcı Kılavuzu - Sayfa 16

Monitör Dell E2210H - 22" LCD Monitor için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell E2210H - 22" LCD Monitor 30 sayfaları. Flat panel monitor
Ayrıca Dell E2210H - 22" LCD Monitor için: Kurulum Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (31 sayfalar)

Sayfayı Yazdır

Auto

Adjust

INPUT SOURCE

VGA

DVI-D

Scan for Sources

COLOR SETTINGS

Input Color Format

Mode Selection

Preset Mode

Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor b

(Coarse) and Phase (Fine) controls under Image Settings.

NOTE:

Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.

Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.

Select VGA input when you are using the analog (VGA) connector. Push

Select DVI-D input when you are using the Digital (DVI) connector. Push

Select Auto Select to scan for available input signals.

Use the Color Setting menu to adjust the monitor's color settings.

Allows you to set the video input mode to:

RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter

YPbPr: Select this option if your DVD player supports only YPbPr output.

Allows you to set the display mode to:

Graphics: Select this mode if your monitor is connected to your computer.

Video: Select this mode if your monitor is connected to a DVD player.

NOTE:

Depending upon the Display Mode you select the Preset Modes available for your monitor change.

Allows you to choose from a list of preset color modes.

In the Graphics mode, you can set the color to the following preset values:

to select the VGA input source.

to select the DVI input source.