Dell E2221HN Kullanıcı Kılavuzu - Sayfa 36

Monitör Dell E2221HN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell E2221HN 45 sayfaları.

Before the DDC/CI function is disabled, the following message is displayed.

The following Power Warning Message box applies to Brightness functions for the first time

when you adjust the Brightness level above the default level.

When the monitor enters Standby mode, the following message appears.

If VGA or HDMI cable is not connected, a floating dialog box appears. The monitor will enter

Standby mode after 4 minutes if left at this state.

See

Troubleshooting

│

Operating your monitor

Dell 2X Monitor

The function of adjusting display setting using PC application

will be disabled.

Do you wish to disable DDC/CI function?

Yes

Dell 2X Monitor

Adjusting to this value will increase power consumption above the

default level. Do you want to continue?

Yes

Dell 2X Monitor

Going into Standby mode...

Dell 2X Monitor

No HDMI Cable

The display will go into Standby mode in 4 minutes.

www.dell.com/E2X21HN

for more information.

E2X21HN