Dell UltraSharp U2419H Kullanıcı Kılavuzu - Sayfa 2

Monitör Dell UltraSharp U2419H için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell UltraSharp U2419H 6 sayfaları. 24 inch monitor

DELL U2419H

Go to contents page

Use a Philips-head screwdriver to remove one screw

for unlocking the USB board unit, then release the

USB board unit and put it aside.

(No.1 screw size=M3x6, Torque=4

Tear off 3pcs aluminium foils for unfixing the panel

lamp

cable.

Use a proper tool to release the function key cable

from the connector, then pull the function key cable

high for releasing the function key cable as the

picture below shown.

Use a Philips-head screwdriver to remove 5pcs

screws for unlocking the front bezel with the

S10

assembled unit.

(No.1~5 screw size=M2x2.7, Torque=3±0.5kgfxcm)

0.5kgfxcm)

se a Philips-head screwdriver to remove 2pcs

screws(left and right) for unlocking the front bezel

S11

with the panel module, then disassemble the front

bezel with the unit and put it aside

(No.1~2 Screw size= M3x0.5x4, Torque=3~4kgfxcm)

Tear off the mylar tape on the function key board,

then use

a Philips-head screwdriver to tighten 3pcs

S12

screws for locking the function key board with the

front bezel.

(No.1~3 Screw size= M2x2.4, Torque=1±0.2kgfxcm)