Dell UltraSharp U2711 Kullanıcı Kılavuzu - Sayfa 6
Monitör Dell UltraSharp U2711 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell UltraSharp U2711 44 sayfaları. U2711
Ayrıca Dell UltraSharp U2711 için: Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (1 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
1
AC power cord connector
2
DC power connector for Dell™ Soundbar
3
Audio out (rear)
4
Audio out (SUB/CTR)
5
Audio out (front)
6
DisplayPort connector
7
DVI connector-1
8
DVI connector-2
9
VGA connector
10
HDMI connector
11
Composite video connector
12
Component video connectors
13
USB upstream port
14
USB downstream ports
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in
use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically
"wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:
VESA Modes
Horizontal
Sync
Normal operation
Active
Active-off mode
Inactive
Switch off
-
* With Audio and USB
** Without Audio and USB
Activate the computer and wake up the monitor to gain access to the OSD.
NOTE: This monitor is TCO '03 power management compatible.
NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the
monitor.
Pin Assignments
VGA Connector
Pin
15-pin Side of the
Number
Connected Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
Vertical Sync
Video
Power
Indicator
Active
Active
Blue
Inactive
Blanked
Amber
-
-
Off
Power Consumption
138 W (maximum)*
113 W (normal)**
Less than 2 W
Less than 1 W