Dell BOSS-N1 Kullanıcı Kılavuzu - Sayfa 30

Depolama Dell BOSS-N1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell BOSS-N1 36 sayfaları. Boot optimized storage solution-n1

Table 6. Supported CLI commands (continued)

CLI commands

event

NOTE:

SMART reports the health status of the M.2 disks. See the SMART status return after the command is run.

NOTE:

There might be inconsistency in the events that are listed in BOSS CLI and other management interfaces that

include Dell Open Manage Storage Services.

Run BOSS-N1 CLI commands on PowerEdge servers

running the Windows operating system

About this task

Follow these procedures to run CLI commands using the Windows operating system:

Steps

1. Download the latest mnvcli BOSS-N1 utility for Windows from www.dell.com/support/home.

2. Extract the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file on the system.

3. Browse the directory where you have extracted the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file and run

the mnvcli.exe file.

The CLI window, within which you can run BOSS-N1 CLI commands, is displayed. Run BOSS-N1 CLI commands from this

window.

Run BOSS-N1 CLI commands on PowerEdge servers

running the Linux operating system

About this task

Follow these procedures to run CLI commands using the Linux operating system:

Steps

1. Download the latest MNVCLI BOSS-N1 utility for Linux from www.dell.com/support/home.

2. Extract the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file on the system.

3. Browse the directory to which you have extracted the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file and run

the ./mnvcli files.

The CLI window, within which you can run BOSS-N1 CLI commands appears.

Run BOSS-N1 CLI commands on PowerEdge servers

running the ESXi operating system

About this task

Follow these procedures to run CLI commands using the ESXi operating system:

Steps

1. Install ESXi on a host machine.

2. Use WinSCP or SCP and copy the attached files into the /tmp/ directory.

Manage BOSS-N1 using CLI commands

Description

Get event information from

NVMe controller.

Windows usage

mnvcli event -c 0

mnvcli event -c 20

Linux/VMware usage

./mnvcli event -c 0

./mnvcli event -c 20