Dell DL4300 Dağıtım Kılavuzu - Sayfa 26

Depolama Dell DL4300 için çevrimiçi göz atın veya pdf Dağıtım Kılavuzu indirin. Dell DL4300 33 sayfaları.
Ayrıca Dell DL4300 için: Başlarken (2 sayfalar), Sisteminizi Kullanmaya Başlarken (2 sayfalar), Sisteminizi Kullanmaya Başlarken (2 sayfalar)

Installing agents on clients

Each client that is backed up by the AppAssure appliance must have the AppAssure agent installed. The

Core Console enables you to deploy agents to machines. Deploying agents to machines requires pre-

configuring settings to select a single type of agent to push to clients. This method works well if all clients

are running the same operating system. However, if there are different versions of operating systems, you

may find it easier to install the agents on the machines.

You can also deploy the Agent software to the agent machine during the process of protecting a

machine. This option is available for machines that do not already have the Agent software installed. For

more information on deploying the Agent software while protecting a machine, see the Dell DL4300

Appliance User's Guide at dell.com/support/home.

To install the agents remotely (push):

If the client is running an operating system version that is older than Windows Server 2012, verify that

the client has the Microsoft.NET4 framework installed:

a. On the client, start the Windows Server Manager.

b. Click Configuration → Services.

c. Ensure that Microsoft .NET Framework is displayed in the list of services.

If it is not installed, you can get a copy to install from microsoft.com.

Verify or change the path to the agent installation packages:

a. In the AppAssure Core Console, click the Configuration tab, and then click Settings in the left

panel.

b. In the Deploy Settings area, click Change.

c. Complete the following information about the agent location:

Field

Agent Installer

Name

Core Address

d. Click OK.

Click the Tools tab, and then click Bulk Deploy in the left panel.

Description

Specifies the exact path to the folder\file for the agent.

Specifies the IP address of the appliance running the AppAssure Core.

NOTE: By default, Core Address is blank. The Core Address field does

not need an IP address as the installation files are installed on the

appliance.