Dell DX6004S Kullanıcı Kılavuzu - Sayfa 24

Depolama Dell DX6004S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell DX6004S 46 sayfaları. Document
Ayrıca Dell DX6004S için: Tamamlayıcı Kılavuz (4 sayfalar), Kurulum ve Yapılandırma Kılavuzu (43 sayfalar), Kurulum ve Yapılandırma Kılavuzu (35 sayfalar), Başlangıç Kılavuzu (28 sayfalar), Uyarı (28 sayfalar), Uyarı (20 sayfalar), Genel Bakış (19 sayfalar), Yapılandırma Kılavuzu (9 sayfalar), Yapılandırma Kılavuzu (9 sayfalar), Yayın Notu (8 sayfalar), Yapılandırma Kılavuzu (7 sayfalar), Yayın Notu (6 sayfalar), Yayın Notu (5 sayfalar), Sürüm Notları (5 sayfalar), Başlangıç Kılavuzu (49 sayfalar)

Adding Network Adapters to DX Cluster Services Nodes

You can add additional network adapters to the DX Cluster Services Nodes to

expand the network bandwidth on both the private and public network.

NOTE:

Access to remote clusters is interrupted when the primary Cluster Services

Node is offline. Do not promote a secondary Cluster Services Node to primary as it

cannot be demoted back to secondary. Demoting the original primary Cluster

Services Node as a secondary Cluster Services Node requires re-imaging the

original primary Cluster Services Node.

To add additional network adapters:

1 Turn off the DX Cluster Services Node.

2 Follow the steps in the Dell DX6a00 system Hardware Owner's Manual to

add a network adapter.

3 Connect the Ethernet cable(s) for the external and internal network

accordingly. See Figure 3-1.

4 Turn on the DX Cluster Services Node.

5 Change the IP address of the external network interface to a new valid IP

address from the Content Services Configuration page of the DX Cluster

Services Administration console.

The first half of the Ethernet ports on the additional network adapter

automatically bonds with the existing network ports on the external

network and the second half automatically bonds with the existing

network ports on the internal private network.

NOTE:

The external network interface IP address can be set back to its original

value. Modifying the external network IP address detects and bonds the additional

network ports.

Figure 3-1. Ethernet Cable Connections to the External and Internal Networks

Setting Up the DX Object Storage Platform

DX 6a00

4 Port

NIC

public network

4 Port

NIC

private network