Dell EMC Integrated Data Protection Appliance DP4400 Donanım Kurulum Kılavuzu - Sayfa 15
Depolama Dell EMC Integrated Data Protection Appliance DP4400 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Dell EMC Integrated Data Protection Appliance DP4400 18 sayfaları. Emc integrated data protection appliance
Sayfayı Yazdır
- 1. Table of Contents
- 2. Installation Overview
- 3. Prepare the Site and Unpack the System
- 4. Install Network Validation Tool
- 5. Install the Rails
- 6. Secure the Rails to the Cabinet
- 7. Install the System in the Cabinet
- 8. Install the Bezel
- 9. Connect the System to the Network
- 10. Connect the Power Cables and Power on
- 11. Configure Idrac
- 12. Installing the Dataprotection-ACM Pre-Installation Patch
- 13. Launch the Appliance Configuration Manager
- 14. Additional Resources
Figure 9 WinSCP session configuration window
3. Create a temporary folder /tmp/patch.
4. Copy the Idpa_pre_update_N.N.N.nnnnnn.tar.gz file to the /tmp/
patch directory.
5. Determine the DataProtection-ACM version by typing the following command:
rpm -qa | grep dataprotection
Ensure that the DataProtection-ACM version is earlier than
dataprotection-2.0.0-571095.x86_64 .
6. Change to the directory that contains the pre-installation patch file by typing
the following command:
cd /tmp/patch
7. Extract the contents of the .tar.gz file by typing the following command:
Idpa_pre_update_N.N.N.nnnnnn.tar.gz
tar -xvf
The contents are extracted to a subdirectory named
Idpa_pre_update_N.N.N.nnnnnn.
8. Change directory to Idpa_pre_update_N.N.N.nnnnnn.tar.gz directory
by typing the following command:
cd /tmp/patch/Idpa_pre_update_N.N.N.nnnnnn/
9. Change permission of install.sh file by typing the following command:
chmod +x install.sh
10. Run the installation script file by typing the following command:
./install.sh
Messages be displayed on the screen during the installation process. The
following message might be displayed, which you can ignore:
"warning: file /usr/local/dataprotection/var/configmgr/
server_data/config/InfrastructureComponents_Template.xml:
Install the IDPA pre-installation patch on the DataProtection-ACM
15