3 Com U.S. Robotics 56K SERIAL CONTROLLER FAXMODEM Kullanım Kılavuzu & Referans - Sayfa 12

Modem 3 Com U.S. Robotics 56K SERIAL CONTROLLER FAXMODEM için çevrimiçi göz atın veya pdf Kullanım Kılavuzu & Referans indirin. 3 Com U.S. Robotics 56K SERIAL CONTROLLER FAXMODEM 19 sayfaları. 3com user's guide & reference modem 56k

Typing Commands

In terminal mode, type commands in either upper or lower case, not a combination. Use
the Backspace key to delete errors. You cannot delete the original AT command
because it is stored in the modem buffer.
If a command has numeric options and you do not include a number, zero is assumed.
For example, if you type ATB, the command ATB0 is assumed.
Every command except A/, +++, and A> must begin with the AT prefix and be entered
by pressing ENTER.
The maximum command length is 58 characters. This does not include the AT prefix,
carriage returns, or spaces.
All defaults are based on the &F1 Hardware Flow Control template loaded in NVRAM when
the modem is shipped.

AT Command Set

A
>
Bn (0,1)
D (0-9,#,*,,,;,!,@,L,",R,S,W,$)
En (0,1)
Fn (0,1)
Hn (0,1)
In (0,1,2,3,4,5,6,7,8,10)
Ln (0,1,2,3)
Mn (0,1,2,3)
On (0,1)
P/T
Qn (0,1,2,3)
Sr=n (0,1,...)
Sr?
S$
Vn (0,1)
Xn (0,1,2,3,4,5,6,7)
Yn (0,1,2,3,4)

Technical Reference

Answer
Repeat Last command forever
ITU-T/US answer sequence
Dial
Echo
Duplex On/Off setting
Offhook On/Off control
Inquiry
I0 Modem type
I1 DSP checksum
I2 Company & Product ID
I3 Product Revision
I4 Current Settings
I5 Profile Settings
I6 Connection Diagnostics
I7 Configuration Profile
I8 Blacklisting International only
I10 Plug and Play information
Speaker volume. Note: assumes default = 2 (medium)
Speaker control
On line
Pulse/Tone dialing
Quiet
Set S-Register, n=integer
Query contents of S register
S register help screen
Verbal/Numeric return result codes
Result code options.
NVRAM template for power up.
8