Dell MD1400-16TB Kurulum Kılavuzu - Sayfa 23

Depolama Dell MD1400-16TB için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell MD1400-16TB 43 sayfaları. Netwitness platform xdr. powervault

Sayfayı Yazdır

Connect a PowerVault to a Hybrid

Note: The PowerVault comes with two SAS cables. You only need one cable to connect the

PowerVault to the physical host. NetWitness Series 5 physical hosts require different cables.

For NetWitness Series 6 physical hosts, use a cable with the mini-SAS connector.

To connect a PowerVault to a Series 6 Hybrid:

Follow the instructions In the

procedure above and connect the NetWitness Series Series 6 Hybrid

Decoder Physical Host

physical host to only one PowerVault.

To connect a PowerVault to a Hybrid physical host:

1. Ensure that the physical host is powered off.

2. Connect one end of the mini-to-mini SAS cable to the Port 0 of the RAID controller on the

back of the Series 5 Hybrid physical host.

3. Connect the other end of the mini-to-mini SAS cable to the PowerVault unit (Port 1 in the

following example).

When you connect the first PowerVault to the RAID controller, make sure that you insert the

cable into the Primary SAS port on the PowerVault as shown in the following figure.

Series 5 R730 Hybrid

PowerVault (Dell MD1400 - 16TB) Setup Guide

Connect PowerVaults to a Concentrator, Archiver, Decoder, or Log

Install PowerVault without Encryption