Dell PowerEdge SC420 Kullanıcı El Kitabı - Sayfa 8
Depolama Dell PowerEdge SC420 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dell PowerEdge SC420 26 sayfaları. Expansion enclosure
Ayrıca Dell PowerEdge SC420 için: Değiştirme Kılavuzu (14 sayfalar), Başlangıç Kılavuzu (7 sayfalar), Bilgi Güncellemesi (21 sayfalar), Kullanıcı El Kitabı (21 sayfalar)
Sayfayı Yazdır
Figure 2. SC420 Front-Panel Features and Indicators
Item
Name
1
System identification
button
2
Power LED
3
Enclosure status LED
4
Hard disk drives
8
Icon
Description
The system identification button on the front control panel
can be used to locate a particular enclosure within a rack.
When the button is pressed, the system status indicators on
the control panel and the Enclosure Management Module
(EMM) blink blue until the button is pressed again.
The power LED lights when at least one power supply unit
is supplying power to the enclosure.
The enclosure status LED lights when the enclosure power
is on.
•
Solid blue during normal operation.
•
Blinks blue when a host server is identifying the
enclosure or when the system identification button is
pressed.
•
Blinks amber or remains solid amber for a few seconds
and then turns off when the EMMs are starting or
resetting.
•
Blinks amber for an extended time when the enclosure
is in a warning state.
•
Remains solid amber when the enclosure is in the fault
state.
•
SC400: Up to 12 3.5-inch SAS hot-swappable hard disk
drives.
•
SC420: Up to 24 2.5-inch SAS hot-swappable hard disk
drives.
About the SC400/SC420 Expansion Enclosure