Dell PowerVault 132T LTO Yükseltme Kılavuzu - Sayfa 6
Depolama Dell PowerVault 132T LTO için çevrimiçi göz atın veya pdf Yükseltme Kılavuzu indirin. Dell PowerVault 132T LTO 42 sayfaları. Dell powervault dlt, vs, and sdlt media handbook version 2.0
Ayrıca Dell PowerVault 132T LTO için: El Kitabı (20 sayfalar)
Sayfayı Yazdır
Updating Firmware Using a Serial Connection
Turn on the tape library.
1
Connect one end of a straight-through serial cable to the serial port of the tape library
2
(not the serial port for the remote management unit).
Connect the other end of the serial cable to a COM port on the system that has the
3
updated firmware that you downloaded.
Open a command prompt in the Microsoft
4
to the directory that contains the downloaded firmware file.
Type the following information at the command prompt:
5
PV132T_LTO2_Update x
where x represents the COM port number on the system where the serial cable was
connected.
Press <Enter>.
6
The firmware update takes approximately 8
A summary of the firmware update displays at the command prompt when the
firmware update has completed.
Reboot the library after the firmware update completes.
7
Verify that the library is online.
8
The LCD Main menu displays Dell 132T when the library is online.
6
Upgrading Tape Drive Modules
NOTE: The downloaded firmware file is located at c:\dell\drivers\rxxxxx\LTO-2 Library,
where rxxxxx is the release number of the downloaded firmware package.
®
®
Windows
operating system and change
–
10 minutes.