Dell PowerVault 56F Bağlantı Kılavuzu - Sayfa 32

Depolama Dell PowerVault 56F için çevrimiçi göz atın veya pdf Bağlantı Kılavuzu indirin. Dell PowerVault 56F 38 sayfaları. Dell powervault 56f switches rack installation guide
Ayrıca Dell PowerVault 56F için: Kullanıcı Kılavuzu (6 sayfalar), Kurulum Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Raf Kurulum Kılavuzu (28 sayfalar)

Sayfayı Yazdır
Dell PowerVault 56F Bağlantı Kılavuzu
This section discusses the configuration management commands, which allow you to
configure the zones.
*
The following example shows the cfgSave command, which writes a copy of the
defined configuration and the name of the effective configuration to flash memory in
all fabric switches:
The saved configuration is automatically reloaded by the switch at system start-up. If
a configuration was in effect when it was saved, the same configuration is reinstated
with an automatic cfgEnable command.
NOTE: Dell recommends saving after you enable and test a configuration. Any
unsaved configuration will be lost if the system fails.
-'
The following example shows the cfgEnable command, which enables a specified
configuration:
+ '
The following example shows the cfgDisable command, which disables the current
zone configuration:
The fabric returns to a non-zoned mode, in which all devices see each other.
4-8
Dell PowerVault 5xF Switches Zoning Guide