Dell PowerVault DL4000 El Kitabı - Sayfa 20

Depolama Dell PowerVault DL4000 için çevrimiçi göz atın veya pdf El Kitabı indirin. Dell PowerVault DL4000 28 sayfaları. Setting up your dell powervault dl4000 backup to disk appliance
Ayrıca Dell PowerVault DL4000 için: Dağıtım Kılavuzu (22 sayfalar), Yayın Notu (11 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Manuel (4 sayfalar), Manuel (2 sayfalar), Sisteminizi Kullanmaya Başlarken (2 sayfalar)

Sayfayı Yazdır
Dell PowerVault DL4000 El Kitabı
Table 10. Resetting Your PowerVault 110T LTO Tape Drive
Drive Type
Dell PowerVault
110T LTO3-060
(Tandberg)
Dell PowerVault
110T LTO3-080
(IBM)
Dell PowerVault
110T LTO4-120
Dell PowerVault
110T LTO4-
120HH
Dell PowerVault
110T LTO5-140
NOTE:
It may take up to 20 minutes for a tape cartridge to fully rewind and eject.
20
LTO Media Handbook
Device Reset Procedure
Press and hold the Eject button for six seconds. The drive enters
1
service mode and all the LEDs flash slowly.
Press Eject twice. The Activity LED flashes fast.
2
Double-click the Eject button.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
(continued)