Dell PowerVault MD3000i Ayarlama Kılavuzu - Sayfa 24
Depolama Dell PowerVault MD3000i için çevrimiçi göz atın veya pdf Ayarlama Kılavuzu indirin. Dell PowerVault MD3000i 32 sayfaları. Configuration for vmware esx server software
Ayrıca Dell PowerVault MD3000i için: Destek Notu (22 sayfalar), Yükseltme Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Değiştirme Kılavuzu (4 sayfalar), Yapılandırma Kılavuzu (10 sayfalar)
Sayfayı Yazdır
Dell™ PowerVault MD3000 and MD3000i Array Tuning Best Practices
Figure 11: MD3000i Advanced IPv4 Settings: VLAN, QOS, Jumbo Frames Support
5.1.3
Sharing Bandwidth with Multiple SAS HBAs
Each SAS wide port includes four full duplex serial links within a single
connector. The individual SAS 1.1 links run a maximum speed of 3Gb/s. A single
path is used as the primary path to a connected device — the second, third, and
fourth paths are used as overflow, when concurrent I/Os overload the primary
channel. For example, if the first link is transmitting data at 3Gb/s, SAS uses
10-bit encoding versus 8-bit for byte transmission, which makes a single 3Gb/s
capped at 300MiB/s. If another block of data then needs to be written to disk, for
example, and link 1 is still busy, link 2 will manage the overflow of data that
cannot be transmitted by link 1. If link 1 finishes its transmission of data, the next
block of data will be transmitted on link 1 again, otherwise another link will be
used. In this way, for heavy I/O workloads, it is possible that all links are being
December 2008 – Revision A01
Page 24