Technical Guide Book for PowerVault MD3200MD3220
MD Storage Manager
The MD Storage Manager provides the perfect combination of robustness and ease-of-use—two attributes
not commonly found together in an entry-level storage management tool. The new MD Storage Manager
graphical user interface (GUI) is ideally suited for the full-time storage administrator, who wants complete
control over their storage configuration, as well as the part-time system administrator, who needs an
intuitive interface that helps them ensure optimal storage utilization.
•
Features of the next generation MD Storage Manager:
•
Automated I/O path protection with host-based, multipath, failover drivers
•
Centralized management of one or more MD3200 and/or MD3220 arrays from any location
•
Backwards compatibility with MD3000 and/or MD3000i arrays
•
Integrated storage partitioning, snapshot and virtual disk copy functionality
•
Support for up to 8 partitions
•
Support for up to 8 snapshots per virtual disk and a total of 128 snapshots per system
•
Support for up to 8 simultaneous virtual disk copies per array and a total of 255 copies per system.
•
RAID levels 0, 1, 5, 10 and 6 supported
•
Up to 30 physical disks supported per disk group (RAID levels 5 and 6)
•
Up to 96 drives in RAID level 0
•
Up to 96 drives in RAID level 1/10
•
Local key management for SDE enabled drives
•
One or more virtual disks per disk group
•
Up to 256 virtual disks (LUNs) per array
•
Dynamic capabilities support on-the-fly reconfigurations
•
Dynamic disk group expansion
•
Dynamic RAID level migration
•
Dynamic virtual disks expansion
•
Dynamic capacity expansion
•
Dynamic segment size migration
•
Dynamic defragmentation
•
Non-disruptive firmware upgrades
•
Support for unlimited hot spares
MD3200 Series Storage Manager Software Packages
The MD3200 series Storage Manager software contains the following four packages:
Client – This package contains the graphical user interfaces (GUI) for monitoring and managing the storage
arrays. It also contains an optional monitor service used to send alerts when there is a critical problem
with the storage arrays.
Utilities – This package contains several providers to simplify integration with Microsoft tools (VSS and VDS)
rd
and integration to 3
party management tools that take advantage of SMI-S protocols.
Agent – This package contains software that allows a storage management station to communicate with the
controllers in the storage array over the I/O path of a host.
Failover Driver – This package contains the multi-path driver used to manage the I/O paths into the
controllers in the storage array. If there is a problem on the path or a failure of one of the controllers, the
driver automatically re-routes the request from the hosts to the other controller in the storage array.
19
Sayfayı Yazdır