Dell PowerVault MD3260i Series Kurulum Kılavuzu - Sayfa 6

Depolama Dell PowerVault MD3260i Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerVault MD3260i Series 11 sayfaları. Storage arrays
Ayrıca Dell PowerVault MD3260i Series için: Donanım ve Yazılım Kılavuzu (25 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Bilgi Güncellemesi (8 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Kurulum (2 sayfalar), Sorun Giderme Kılavuzu (20 sayfalar), Sorun Giderme Kılavuzu (18 sayfalar), Dağıtım Kılavuzu (24 sayfalar)

Dell PowerVault MD3260i Series Kurulum Kılavuzu
Block services
Disk drive lite
Copy services
Job control
Extent composition
Disk sparing
Initiator port (SAS and SATA)
Target port (SAS)
iSCSI target port
Access points
Indications
Masking and mapping
Location
Software inventory
Software update
Erasure
Battery
Storage asymmetry
Message log
Block server performance
NOTE: Block server performance statistics are not available for controller firmware versions prior to 7.10.

Installing And Uninstalling The SMI-S Provider

System Requirements For SMI-S Provider

The following are the system requirements to install and run the SMI-S Provider.
System Component
Requirement
Memory
1 GB minimum (2 GB recommended).
Connectivity
Ethernet with 100BASE-T minimum (Gigabit Ethernet preferred) and TCP/IP.
Port
TCP port 5988 or TCP port 5989, or any other available port if these ports are not available.
Storage array
The device credentials profile requires the storage array password (SharedSecret) to modify
password
operations. The SMI-S Provider persistently tracks an instance of the SharedSecret per
storage array.
Scalability
There is no limit on the number of storage systems that can be supported by a single provider
instance. The recommended maximum is 10 for moderately to fully configured storage systems
per provider, or a total of around 5000 volumes. In large configurations, deploy additional
providers on different servers in your storage network to manage additional storage systems.
6