Dell PowerVault MD3660i Series Storage Array Kurulum Kılavuzu - Sayfa 8

Depolama Dell PowerVault MD3660i Series Storage Array için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerVault MD3660i Series Storage Array 11 sayfaları. Storage arrays
Ayrıca Dell PowerVault MD3660i Series Storage Array için: Donanım ve Yazılım Kılavuzu (25 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Bilgi Güncellemesi (8 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Kurulum (2 sayfalar), Sorun Giderme Kılavuzu (20 sayfalar), Sorun Giderme Kılavuzu (18 sayfalar), Dağıtım Kılavuzu (24 sayfalar)

Sayfayı Yazdır
Dell PowerVault MD3660i Series Storage Array Kurulum Kılavuzu
Function
Command
To enable or disable
# cimconfig -s slp={true | false} -p
service location
If SLP is enabled, see the table below for additional settings information.
protocol (SLP)
Commands are of the following format: cimconfig -s <propertyName>={true|
false} -p where
Table 1. Additional Setting Information if SLP is Enabled
runinternal
runinternal
PegasusSLP
PegasusSLP
true
false
false
true
false
false
false
false
false
true
NOTE: All other combinations of the SLP property values have undefined behavior.
For more information, see the documentation available in the source release archive at openpegasus.org.
8
<propertyName> is a column heading in the following table.
propertyName
registerExter
nal
PegasusSLP
false
false
true
true
false
register
Behavior
Multiple SLP
false
Internal Pegasus SLP is
started when cimserver
starts.
false
External Pegasus SLP
registration runs in
cimserver with a
default registration
timeout set to 3 hours
(same as the SLP
default timeout).
false
External OpenSLP
registration is run in
CIM server.
true
External OpenSLP
registration is
attempted and falls
back to external
Pegasus SLP
registration if it fails
(default setting).
true
External Pegasus SLP
registration is
attempted and falls
back to external
OpenSLP registration if
it fails.