Dell PowerVault NX1950 Kurulum ve Sorun Giderme Kılavuzu - Sayfa 28

Depolama Dell PowerVault NX1950 için çevrimiçi göz atın veya pdf Kurulum ve Sorun Giderme Kılavuzu indirin. Dell PowerVault NX1950 48 sayfaları. For vmware esx server software
Ayrıca Dell PowerVault NX1950 için: Dağıtım Kılavuzu (34 sayfalar), Önemli Bilgiler Kılavuzu (26 sayfalar), Başlarken (49 sayfalar), Dağıtım Kılavuzu (38 sayfalar), Yükseltme Kılavuzu (18 sayfalar), Referans Kılavuzu (4 sayfalar), Kurulum (2 sayfalar), Kullanma (2 sayfalar), Yapılandırma Kılavuzu (11 sayfalar)

Target Side

1 Right-click the Target icon in the MMC and click Create iSCSI Target.

2 Type the Target name, Target description, and click Next.

3 Browse for the desired IQN identifier of the initiator or click Advanced→

Add IP address and enter the IP address of the initiator, and then click Next.

4 Select the desired Highly-Available iSCSI instance from the drop-down

menu and click Next.

5 Click Finish.

The Target should be successfully created.

Create VDs for the iSCSI Target

NOTE:

Prior to creating a VD for the iSCSI Target, you need to create a volume

using the Storage Provision wizard.

Right-click the newly created Target and select Create Virtual disk for iSCSI

Target. Follow the wizard to successfully create a VD.

Move Volume to desired iSCSI Instance

1 Launch Cluster Administrator by clicking Start

Cluster Administrator. Locate the volume that the devices (.vhd files)

were located on. This is under cluster groups.

2 Right-click the volume, select Change Groups and select one of the newly

created highly-available instances you want to move the volume to.

3 A pop-up screen is displayed for confirmation. Click Yes twice.

Import Devices

1 Right-click the devices icon in the MMC, select Import Virtual Disk, and

click Next.

2 Browse to the volume the .vhd files are located on, select the .vhd file, click

OK, Next, and then Finish.

3 Repeat step 2 to import all .vhd files.

Managing Your Cluster

→

Administrative Tools

→