Dell PowerVault NX1950 Kurulum ve Sorun Giderme Kılavuzu - Sayfa 36

Depolama Dell PowerVault NX1950 için çevrimiçi göz atın veya pdf Kurulum ve Sorun Giderme Kılavuzu indirin. Dell PowerVault NX1950 48 sayfaları. For vmware esx server software
Ayrıca Dell PowerVault NX1950 için: Dağıtım Kılavuzu (34 sayfalar), Önemli Bilgiler Kılavuzu (26 sayfalar), Başlarken (49 sayfalar), Dağıtım Kılavuzu (38 sayfalar), Yükseltme Kılavuzu (18 sayfalar), Referans Kılavuzu (4 sayfalar), Kurulum (2 sayfalar), Kullanma (2 sayfalar), Yapılandırma Kılavuzu (11 sayfalar)

Sayfayı Yazdır
Dell PowerVault NX1950 Kurulum ve Sorun Giderme Kılavuzu
Table A-1. General Cluster Troubleshooting
Problem Area
The PowerVault
NX1950 cluster
solution is unable to
detect the PowerVault
MD3000 storage array
Replacing the
PowerVault MD3000
storage array
36
Troubleshooting
Probable Cause
Firewall exceptions are
closed.
The PowerVault NX1950
cluster nodes and the
PowerVault MD3000
storage array were not
turned on in the correct
sequence.
(continued)
Corrective Action
Execute the firewall
exceptions script that is a
part of the PowerVault
NX1950 cluster solution
software. This script restores
the exceptions to factory
settings and allows cluster
operations to run.
To correct this issue:
Turn off the cluster nodes
1
and the PowerVault
MD3000 storage array.
Turn on the PowerVault
2
MD3000 storage array and
allow it to initialize (The
blue LED on the front
panel of the PowerVault
MD3000 storage array
must glow).
After the PowerVault
3
MD3000 storage array has
initialized, turn on the
PowerVault NX1950 cluster
nodes.
The PowerVault MD3000
storage array is now
detectable.
For instructions on replacing
the storage array, see the
documentation that shipped
with the PowerVault
MD3000 storage array.