Dell S3100 Series Başlangıç Kılavuzu - Sayfa 32

Depolama Dell S3100 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Dell S3100 Series 46 sayfaları.
Ayrıca Dell S3100 Series için: Kurulum Kılavuzu (45 sayfalar), Başlangıç Kılavuzu (27 sayfalar)

Sayfayı Yazdır

1. Reset Button
2. Accessing the Console
3. Navigating Cli Modes
4. Installing the Software
5. Default Configuration
6. Creating a Port-Based Vlan
7. Connect the System to the Network

Figure 23. Installing the Switch in a Two-Post Center-Mount Configuration

Configuring a Four-Post Thread

To install your switch in a four-post thread configuration, follow these steps.

For this configuration, remove the flange ear castings from each end of the ReadyRails assemblies.

To remove the two screws from each flange ear and remove each casting, use a Torx driver. See

item 1 in the following illustration. Retain the castings for future rack requirements.

For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at

each end. See item 2 in the following illustration.

Installation