Dell 5324 - PowerConnect Switch Yayın Notu - Sayfa 23

Anahtar Dell 5324 - PowerConnect Switch için çevrimiçi göz atın veya pdf Yayın Notu indirin. Dell 5324 - PowerConnect Switch 23 sayfaları. Release notes

Sayfayı Yazdır

radius-server host

Change a parameter description:
Current Guide
♦
Syntax
type—Specifies the usage type of the
Parameter
server. Can be one of the following
values: login, 802.1x or all. If
unspecified, defaults to all.
User
Guidelines
Deleted Commands
The following commands are documented but not supported in this release.
•
default vlan-disable
•
show vlan internal usage
•
ip internal-usage-vlan
Modified Text
Under the heading Editing Features and sub-heading Terminal Command Buffer.
Current Guide
The standard number of 10 commands
can be increased to 256.
Examples:

TAC_PLUS configuration

Note for $enab15$ user setup.
The following user is needed if a user is allowed to go from level 1 to a level 15.

Example.

logs into as user lever then goes to a exec user from console.
console>enable
enter password if console password id enable.
console#
user = $enab15$ {
default service = permit
login = cleartext "15"
service = exec {
priv-lvl = 15
}
}
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Change to:
♦
Add:
♦
Change to:
The standard number of 10 commands can be
increased to 216.
End of Release Notes

Subject to Change Without Notice

type—Specifies the usage type of the
server. Can be one of the following
values: login, dot.1x or all. If
unspecified, defaults to all.
Up to 4 servers can be defined.
Page 19