Dell Force 10 Manuel - Sayfa 7
Anahtar Dell Force 10 için çevrimiçi göz atın veya pdf Manuel indirin. Dell Force 10 29 sayfaları. Implementing fcoe in the linux operating system
Sayfayı Yazdır
Implementing FCoE in the Linux Operating System
Setting up your network infrastructure for FCoE
Perform the following steps to set up your network infrastructure for FCoE. While performing these
steps, refer to the network diagram in Figure 1.
1. Set up in NPIV mode and enable the FCoE feature on the Cisco Nexus 5020 distribution switch.
From the Global Configuration Mode of the distribution switch, run the following commands:
feature fcoe
feature lcap
feature lldp
feature npiv
Figure 1.
Network infrastructure diagram.
7