Dell N1148T-ON Başlangıç Kılavuzu - Sayfa 5

Anahtar Dell N1148T-ON için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Dell N1148T-ON 27 sayfaları.

Sayfayı Yazdır

Introduction

This document provides basic information about the Dell Networking

N1100-ON Series switches, including how to install a switch and perform the

initial configuration. For information about how to configure and monitor

switch features, refer to the User Configuration Guide, which is available on

the Dell Support website at dell.com/support. See the Support website for

the latest updates on documentation and firmware.

NOTE:

Switch administrators are strongly advised to maintain Dell Networking

switches on the latest version of the Dell Networking Operating System (DNOS).

Dell Networking continually improves the features and functions of DNOS based on

feedback from you, the customer. For critical infrastructure, pre-staging of the new

release into a non-critical portion of the network is recommended to verify network

configuration and operation with the new DNOS version.

N1100-ON Series Hardware Overview

This section contains information about device characteristics and modular

hardware configurations for the Dell Networking N1100-ON Series switch.

Power Consumption for N1100-ON Series PoE Switches

Table 1-1 describes the power consumption for N1100-ON Series PoE

switches. The PoE power budget is 60W for the N1108P-ON, 185W for the

N1124P-ON, and 370W for the N1148P-ON.

Table 1-1. Power Consumption for N1100-ON Series PoE Switches

Model

Input Voltage

N1108P-ON

100V/60Hz

110V/60Hz

120V/60Hz

220V/50Hz

240V/50Hz

Power Supply

Configuration

Main PSU

Maximum

Steady Current

Consumption (A)

0.95A

0.87A

0.80A

0.49A

0.45A

Getting Started Guide

Maximum

Steady

Power (W)

88.64W

88.43W

88.22W

89.28W

89.70W