Dell PowerConnect 2124 Sistem Bilgi Kılavuzu - Sayfa 6

Anahtar Dell PowerConnect 2124 için çevrimiçi göz atın veya pdf Sistem Bilgi Kılavuzu indirin. Dell PowerConnect 2124 33 sayfaları. Unmanaged switches
Ayrıca Dell PowerConnect 2124 için: Kullanıcı Kılavuzu (48 sayfalar)

Dell PowerConnect 2124 Sistem Bilgi Kılavuzu
CAUTION: Safety Instructions (continued)
If any of the following conditions occur, unplug the product from the electrical outlet and replace the part
or contact your trained service provider:
Keep your system away from radiators and heat sources. Also, do not block cooling vents.
Do not spill food or liquids on your system components, and never operate the product in a wet
environment. If the system gets wet, see the appropriate section in your troubleshooting guide or contact
your trained service provider.
Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by
shorting out interior components.
Use the product only with approved equipment.
Allow the product to cool before removing covers or touching internal components.
Operate the product only from the type of external power source indicated on the electrical ratings label. If
you are not sure of the type of power source required, consult your service provider or local power company.
NOTICE: To help avoid damaging your system, be sure the voltage selection switch (if provided)
on the power supply is set for the voltage that most closely matches the AC power available in
your location. Also be sure that your monitor and attached devices are electrically rated to
operate with the power available in your location.
Use only approved power cable(s). If you have not been provided with a power cable for your system or for
any AC-powered option intended for your system, purchase a power cable that is approved for use in your
country. The power cable must be rated for the product and for the voltage and current marked on the
product's electrical ratings label. The voltage and current rating of the cable should be greater than the
ratings marked on the product.
To help prevent electric shock, plug the system and peripheral power cables into properly grounded
electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do
not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use
a 3-wire cable with properly grounded plugs.
Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products
plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for
the extension cable or power strip.
To help protect your system from sudden, transient increases and decreases in electrical power, use a surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped
over. Be sure that nothing rests on any cables.
Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
modifications. Always follow your local/national wiring rules.
6
Unmanaged Switches System Infor mation Guide
The power cable, extension cable, or plug is damaged.
An object has fallen into the product.
The product has been exposed to water.
The product has been dropped or damaged.
The product does not operate correctly when you follow the operating instructions.