Dell POWERCONNECT 5524 Başlangıç Kılavuzu - Sayfa 18
Anahtar Dell POWERCONNECT 5524 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Dell POWERCONNECT 5524 20 sayfaları. Powerconnect 5500 series
Ayrıca Dell POWERCONNECT 5524 için: Sürüm Notları (15 sayfalar)
Sayfayı Yazdır
To manage the switch using SNMP (required for Dell
Network Manager) you can:
•
Setup the initial SNMP version 2 account now.
•
Return later and set up the SNMP version account.
For more information on setting up a SNMP version
2 account, see the user documentation.
Would you like to set up the SNMP management
interface now? [Y/N]
4 Enter [N] to skip to Step 7 or enter [Y] to continue the Setup Wizard. If
you enter [Y] the following information is displayed:
To set up the SNMP management account you must
specify the management system IP address and the
"community string" or password that the particular
management system uses to access the switch. The
wizard automatically assigns the highest access
level [Privilege Level 15] to this account.
You can use Dell Network Manager or other
management interfaces to change this setting later
and to add additional management system later. For
more information on adding management systems, see
the user documentation.
To add a management station:
Please enter the SNMP community string to be used:
5 Enter the SNMP community string. You can use the default name "public"
Please enter the IP address of the Management
System (A.B.C.D) or wildcard (0.0.0.0) to manage
from any Management Station:[0.0.0.0].
6 Enter the SNMP Management System IP.
18
Configuring the Switch