Dell S6000-ON Kurulum Kılavuzu - Sayfa 17

Anahtar Dell S6000-ON için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell S6000-ON 41 sayfaları. Open networking
Ayrıca Dell S6000-ON için: Başlangıç Kılavuzu (26 sayfalar), Sorun Giderme Kılavuzu (29 sayfalar)

Sayfayı Yazdır
Dell S6000-ON Kurulum Kılavuzu
Figure 6. 1U tool-less configuration
2
Align and seat the front flange pegs in the holes on the front side of the vertical post, item 2.
3
Repeat this procedure for the second rail.
4
To remove each rail, pull on the latch release button on each flange ear and unseat each rail, item 3.

Two-post flush-mount configuration

CAUTION:
Your system is not NEBS Earthquake Z4-compliant if you use this installation method.
1
Remove the tool-less latch castings from the front side of each ReadyRails assembly, item 1.
Use a Torx driver to remove the two screws from each front flange ear on the switch side of the rail. Remove each latch casting.
Retain the castings for future rack requirements. It is not necessary to remove the rear flange castings.
S6000–ON installation
17