Dell 5530 Mono Laser Servis Kılavuzu - Sayfa 22
Yazıcı Dell 5530 Mono Laser için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell 5530 Mono Laser 46 sayfaları. Loading paper and specialty media
Ayrıca Dell 5530 Mono Laser için: Hızlı Referans Kılavuzu (2 sayfalar), Kurulum ve Teknik Özellikler Kılavuzu (29 sayfalar), Kurulum ve Özellikler (29 sayfalar)
Sayfayı Yazdır
a
Remove the captive screw to release the bracket that secures the WLAN card to the computer [1] and lift the bracket away
from the computer [2].
b Disconnect the antenna cables from the WLAN card [3].
c
Slide and remove the WLAN card from its connector on the board [4].
Installing the WLAN Card
1
Align the notch on the WLAN card with the tab on the WLAN-card connector on the system board.
2
Align the bracket which secures the WLAN card to the palmrest assembly.
3
Connect the antenna cables to the WLAN card.
CAUTION:
To avoid damage to the WLAN card, do not place any cables under it.
NOTE:
The color of the antenna cables is visible near the tip of the cables. The antenna-cable color scheme for the WLAN
card supported by your computer is as follows:
Table 2. Antenna-Cable Color Scheme for the WLAN Card
Connectors on the WLAN card
Main (white triangle)
Auxiliary (black triangle)
Multiple input, multiple output (grey triangle)
4
Tighten the captive screw to secure the bracket and the WLAN card to the palmrest assembly.
5
Install the:
a
Battery
b
Base cover
6
Follow the procedures in
22
Disassembly and reassembly
After Working Inside Your Computer
Antenna-cable color
white
black
Grey (optional)