AVYCON AVR-NSV08P8 Hızlı Başlangıç Kılavuzu - Sayfa 5

DVR AVYCON AVR-NSV08P8 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AVYCON AVR-NSV08P8 17 sayfaları.

Startup Wizard

Wizard setting menu includes: start wizard page, Network, Network Conﬁguration, Date/

Time, IPC Setup, Disk, Resolution , Mobile and Summary.

1) Start Wizard

Click the

Start Wizard

If you connect to a router allows to use DHCP, please check the

assign automatically all the network parameters for your DVR. Unless the network is

manually addressed below parameters:

IP Address:

The IP address identiﬁes the DVR in the network. It consists of four groups

of numbers between 0 to 255, separated by periods. For example, "192.168.001.100".

Subnet Mask:

Subnet mask is a network parameter which deﬁnes a range of IP addresses

that can be used in a network. If IP address is like a street where you live then subnet mask

is like a neighborhood. The subnet address also consists of four groups of numbers,

separated by periods. For example, "255.255.000.000".

Gateway:

This address allows the DVR to access the Internet. The format of the Gateway

address is the same as the IP Address. For example, "192.168.001.001".

DNS1/DNS2:

DNS1 is the primary DNS server and DNS2 is a backup DNS server.

Usually should be enough just to enter the DNS1 server address

Port

Web Port:

This is the port that you will use to log in remotely to the DVR (e.g. using the Web

Client). If the default port 80 is already taken by other applications, please change it.

Client Port:

This is the port that the DVR will use to send information through (e.g. using

the mobile app). If the default port 9000 is already taken by other applications, please

change it.

RTSP Port:

This is the port that the DVR will be allowed to transmit real-time streaming to

other device (e.g. using a streaming Media player.).

UPNP:

If you want to log in remotely to the DVR using Web Client, you need to complete

the port forwarding in your router. Enable this option if your router supports the UPnP.

In this case, you do not need to conﬁgure manually port forwarding on your router.

If your router does not support UPnP, make sure the port forwarding is completed

manually in your router.

DIGITAL VIDEO RECORDERS | AVR SERIES

to proceed to the next step

2) Network Conﬁguration

DHCP

box. The router will