Dell C7765DN Tamamlayıcı Kılavuz - Sayfa 15

Hepsi Bir Arada Yazıcı Dell C7765DN için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Dell C7765DN 27 sayfaları. Color multifunction printer, blue angel information of ral-uz171
Ayrıca Dell C7765DN için: Manuel (1 sayfalar), Şablon Kılavuzu (14 sayfalar)

Sayfayı Yazdır
Dell C7765DN Tamamlayıcı Kılavuz
Settings for the Secure Operation 2 (Initial Settings Procedures Using Dell Printer Configuration Web Tool)

Settings for the Secure Operation 2

(Initial Settings Procedures Using Dell Printer Configuration Web Tool)

This section describes the initial settings related to security features, and how to set
them on Dell Printer Configuration Web Tool.

Preparations for settings on the Dell Printer Configuration Web Tool

To use Dell Printer Configuration Web Tool, the administrator will need a computer
with TCP/IP support and a browser that satisfies "SSL/TLS" (P.8) conditions.
1
Open your Web browser, enter the machine's TCP/IP address in the Address or
Location field, and press the <Enter> key.
2
Enter the System Administrator's ID and the passcode if prompted.
3
Display the [Properties] screen by clicking the [Properties] tab.

Change the System Administrator's Passcode

1
Click [Security] on the [Properties] screen.
2
Click [System Administrator Settings].
3
Enter the System Administrator's ID in the [Administrator's Login ID] box.
4
Enter a new System Administrator's passcode of 9 or more characters in the
[Administrator's Passcode] box.
5
Enter the new System Administrator's passcode in the [Retype Administrator's
Passcode] box.
6
Click [Apply].

Set Maximum Login Attempts

Follow the procedure below to specify maximum login attempts.
1
Click [Security] on the [Properties] screen.
2
Click [System Administrator Settings].
3
Enter the System Administrator's ID in the [Administrator's Login ID] box.
4
Enter [5] in the [Maximum Login Attempts] box.
5
Click [Apply].

Set Access Control

Follow the procedure below to restrict access to the machine.
1
Click [Security] on the [Properties] screen.
2
Click [Authentication Configuration].
15