AVYCON AVR-T908A-1T Hızlı Başlangıç Kılavuzu - Sayfa 2

DVR AVYCON AVR-T908A-1T için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AVYCON AVR-T908A-1T 2 sayfaları. Hybrid dvr

Sayfayı Yazdır

5. Checkmark the device you want to add and then click "Add" button.

The DVR will automatically refresh the cameras and return to "Edit

Camera" interface. "Online" status means connecting the device

successfully and you will see the live image. You may select the added

device and click

button to modify channel, IP address, ect.

Edit Camera

Signal Access Set

Edit Camera Group

Protocol

No.

Camera Name

IP Address

Port

Status

Online

IP Camera 1

192.168.1.45

XXX

[A01]Camera1

[A02]Camera2

[A03]Camera3

[A04]Camera4

Edit Camera

Camera Name

IP Camera 1

IP Address

192 .168 . 1 . 58

Port

Protocol

XXX

Model

XXX

admin

Username

Password

Display Password

Test

• WAN

1. Set the network of the DVR. Go to Start → Settings → Network →

TCP/IPv4. Input static IP address or enable PPPoE and then input

the user name and password received from your ISP.

2. Go to Start → Settings → Camera. Click "Add Camera" or

behind the column of the search camera and select "Manually

Add" to add the IP cameras. Input IP address, server port,

username and password of the IP camera. The IP camera must be

connected over WAN. And here the IP address of the IP camera

must be a WAN IP address.

7. UPnP

You can use the UPnP function to enable the fast connection of the

1. Go to Start → Settings → Network → UPnP, and enable UPnP

and then click "Apply" button to save.

2. Enable the UPnP function in the router.

3. Click "Refresh" button to refresh the UPnP status. If the UPnP

status were still "Invalid UPnP" after refreshing it for several times,

the port would be wrong. Please change the mapping type to

"Manual" and then click

to modify the port until the UPnP

status turns to "valid UPnP".

Port Type

Server Port

Search Camera

RTSP Port

Model

Preview

Edit

Delete

XXX

8. NAT

• NAT Setting

1. The DVR shall be powered on and connected to the network.

2. Go to Start → Settings → Network → TCP/IPv4. You can obtain

the IP address, subnet mask and gateway automatically. You can

also manually enter them according to the actual network situation.

Please make sure the network segment is the same as that of the

network which is used.

3. Set the preferred or alternative DNS Server. Click "Apply" to save

the parameters.

4. Go to Start → Settings → Network → NAT tab. Enable NAT and

select the NAT Server (The default NAT Server is nat.autonat.com).

Click "Apply" to save the parameters.

Cancel

TCP/IPv4

NAT

NAT Server

• NAT Access

After ﬁnishing the NAT settings, you can input www.autonat.com in the

IE address bar and then press enter to go to the following interface.

If you are the ﬁrst time to access the NAT, you shall download and

install the ActiveX according to the popup tips. After installing

ActiveX successfully, it will pop the login box.

TCP/IPv4 Port

DDNS E-mail

UPnP

NAT

NetworkStatus

UPnP

Enable

Map Type

Auto

Port

UPnP Status

Edit

External Port

External Address

HTTP Port

183.17.254.19

Valid UPnP

6036

183.17.254.19

6036

Valid UPnP

554

Invalid UPnP

Refresh

Apply

Port

DDNS

E-mail

UPnP

NAT

Network Status

Enable

nat.autonat.com

Apply

Enter device serial number

Enter Username

Enter Password

Device Serial Number: Click

on the menu bar at the bottom of the

live interface to check the serial number or go to Start → Settings →

Network → Network Status to check the serial number of the DVR).

Username: The username of the DVR. The default username is admin.

Password: The password of the DVR. The password is set by yourself

when you conﬁgure the wizard for the ﬁrst time.

9. Manual Recording

Before recording, please install and format a HDD. In the live

interface you can see the menu toolbar. Click

recording. Click it again to stop recording. You can also click

check the status of the recording.

10. Playback

• Instant Playback

Click "Instant Playback" in the right-click menu of the camera's

preview window to select or drag the playback progress bar

to change the playback time to play back the record.

• General Playback

Click

on the tool bar at the bottom of the live preview

interface or click Start → Playback to go to the playback interface

as shown below. You can also add the playback cameras manually.

Click

in the playback window to pop up the "Add Camera"

window. Check the cameras in the window and then click "Add"

to add playback camera. The record ﬁles of the added playback

camera will be played in the playback interface.

button to start