Allied Time USA AT-2700 Kullanıcı Kılavuzu - Sayfa 4
Saat Allied Time USA AT-2700 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Allied Time USA AT-2700 8 sayfaları.
Sayfayı Yazdır
To enter setup mode, please move SETUP Switch to the left. To change or set a desired feature, press
Enter button first, then use + or – buttons to make your selection, then press Enter again to confirm
your change. You can also use + or – buttons to navigate through the setup menu options. You can exit
setup mode at any time by moving the SETUP Switch back to the right.
Clock Display Commands will guide you through each step (shown in parenthesis next to each step
explanation).
Setup Year
1.1
desired year using
Setup Month
1.2
select desired month using
Setup Date
1.3
desired date (1 through 31) using
Setup Time -Hour
1.4
Enter, select desired hour using
Setup Time- Minutes
1.5
press Enter, select desired minutes using
Display Hour Format
1.6
Hour Format on the Display. To make changes, press Enter, select AM/PM or MIL using
then press Enter again to confirm.
Printed Hour Format
1.7
Hour Format when it comes to printing on the time card. To make changes, press Enter, select
AM/PM or MIL using
Printed Minutes Format
1.8
on the time card. Press Enter, then use
8:30 will be printed 8:30) or HUN (decimal minutes as 100
8.50). To make changes, press Enter, select desired format using
confirm.
Page | 4
SETUP INSTRUCTIONS
(SET YEAR=2017): use to enter adjust year. To make changes, press Enter, select
+/ -
, then press Enter again to confirm.
(SET MONTH==JAN): use to enter adjust month. To make changes, press Enter,
+/ -
, then press Enter again to confirm.
(SET DAY=01): use to enter adjust date. To make changes, press Enter, select
+/ -
(SET HOUR=08AM): use to enter adjust hour. To make changes, press
+/ -
(SET MINUTES=00): use to enter adjust minutes. To make changes,
(DSPLY HOUR=AM/PM): use to select AM/PM (12Hr) or Military (24)
(PRINT HOUR=AM/PM)
+/ -
, then press Enter again to confirm.
(PRINT MINS=STD): use to select how minutes should be printed
, then press Enter again to confirm.
, then press Enter again to confirm.
+/ -
, then press Enter again to confirm.
:
use to select AM/PM (12Hr) or Military (24)
+/-
buttons to select either STD (standard minutes, ex.
th
of one hour, ex. 8: 30 will be printed
+/ -
, then press Enter again to
+/ -
,