AVYCON AVN W10-2P08W96G Hızlı Başlangıç Kılavuzu - Sayfa 5

Anahtar AVYCON AVN W10-2P08W96G için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AVYCON AVN W10-2P08W96G 7 sayfaları. Weatherproof poe switch

Sayfayı Yazdır

Connect Power Supply

AVN-W10-2P08W96G
The power connection uses a quick-plug terminal block connector. It is recommended that
the user use a cable with a current capacity of more than 6A.
Warning:
attention to the polarity marks of the interface avoid connection
errors.
The terminal block connector the of is used for power input. Please follow the steps
below to insert the power wire:
1: Insert two power lines into the hole at the end side of the connection.
2: Tighten the screw above the connection end clockwise with a screwdriver, for preventing
the power line from loosing
3: The other end of the power line is connected to the power supply system.
1 2 3
L
The wire gauge for the
terminal block should be in
the range between 12 ~ 24 AWG.
Power Input: Supports input voltages 100-240VAC, 50/60Hz.
Grounding: use specialized ground lead connect
3
WEATHERPROOF PoE SWITCH | AVN-W10-2P08W96G | CONNECT POWER SUPPLY
When connecting to the power supply system, please pay
1
2
3
4
5
6
7
8
4 5
NC
N
NC
Ground
10
9
1
2
3 4
5