EarthQuake DB-10 Kurulum ve Referans Kılavuzu - Sayfa 4
Subwoofer EarthQuake DB-10 için çevrimiçi göz atın veya pdf Kurulum ve Referans Kılavuzu indirin. EarthQuake DB-10 6 sayfaları. Db subwoofer
Ayrıca EarthQuake DB-10 için: Broşür (11 sayfalar)
Sayfayı Yazdır
WIRING
CONFIGURATIONS
Ohms 2, 4, 6, 8
4
HOW TO WIRE YOUR EARTHQUAKE SUBWOOFER
Where R= Total system impedance
If using SINGLE 2 OHM coils the total load would be 2.0 ohm
If using SINGLE 4 OHM coils the total load would be 4.0 ohm
If using SINGLE 6 OHM coils the total load would be 6.0 ohm
If using SINGLE 8 OHM coils the total load would be 8.0 ohm
If using SINGLE 2 OHM coils the total load would be 1.0 ohm
If using SINGLE 4 OHM coils the total load would be 2.0 ohm
Ohms 2, 4, 6, 8
If using SINGLE 6 OHM coils the total load would be 3.0 ohm
If using SINGLE 8 OHM coils the total load would be 4.0 ohm
If using SINGLE 2 OHM coils the total load would be .66 ohm
If using SINGLE 4 OHM coils the total load would be 1.3 ohm
If using SINGLE 6 OHM coils the total load would be 2 ohm
If using SINGLE 8 OHM coils the total load would be 2.7 ohm
Series formula:
Rt= R1+R2+R3+....
Where Rt= Resistance seen by amplifier
Ohms 2, 4, 6, 8
If using SINGLE 2 OHM coils the total load would be 0.5 ohm
If using SINGLE 4 OHM coils the total load would be 1.0 ohm
If using SINGLE 6 OHM coils the total load would be 1.5 ohm
If using SINGLE 8 OHM coils the total load would be 2 ohm
Ohms 2, 4, 6, 8
Study sample diagram below,
then follow charts to the left.
4-Ohm VC.
4-Ohm VC.
Example for Dual-4 series
Example for single-4
4-Ohm VC.
4-Ohm VC.
Example Dual-4 Parallel
Specifications are subject to change without notice.
EARTHQUAKE SOUND • WIRING CONFIGURATIONS
8-Ohm
4-Ohm
2-Ohm