EarthQuaker Devices Afterneath Kullanım Kılavuzu
Müzik Pedalı EarthQuaker Devices Afterneath için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. EarthQuaker Devices Afterneath 2 sayfaları.
<<< Switching >>>
This device is true bypass and uses electronic relay based switching. Audio will not pass
without power.
<<< Power Requirements >>>
• Current Draw: 74mA
• This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We
always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple
isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.
Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter
dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
<<< Tech Specs >>>
• Input Impedance: 1M Ohm
<<< Warranty >>>
This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any
issues, please email [email protected].
www.earthquakerdevices.com
©2018 EarthQuaker Devices LLC
• Output Impedance: 500 Ohm
O P E R A T I O N M A N U A L