Award CS1-903S Kullanım Kılavuzu - Sayfa 7

Havalandırma Davlumbazı Award CS1-903S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Award CS1-903S 15 sayfaları.

HINTS FOR EXHAUST DUCT INSTALLATION

The following rules must be strictly followed to obtain optimal air extraction:

• Keep expansion pipe short and straight.

• Do not reduce the size or restrict the expansion pipe.

• When using the expansion pipe always install the pipe pulled taut to minimize

pressure loss.

• Failure to observe these basic instructions will reduce the performance and increase

noise levels of the range hood.

• Any installation work must be carried out by a competent qualified electrician.

•Do not connect the ducting system of the range hood to any existing ventilation

system which is being used for any other appliance, such as warmer tube, gas tube

and hot wind tube.

•The angle of the bend of the expansion pipe should not be less than 120º; you must

direct the pipe horizontally, or, alternatively, the pipe should go up from the initial point

and should be led to an outer wall.

•After the installation, make sure that the range hood is level to avoid grease collection

at one end.

•Ensure the expansion pipe selected for installation complies with relevant standards

and is fire retardant.

WARNING:



For safety reason, please use only the same

size of fixing or mounting screws which are

recommended in this instruction manual.



Failure to install the screws or fixing device in

accordance with these instructions may result

in electrical hazards.