Allied Vision Alvium Manuel - Sayfa 13

Aksesuarlar Allied Vision Alvium için çevrimiçi göz atın veya pdf Manuel indirin. Allied Vision Alvium 18 sayfaları.

Sensor

1. Place the camera on your work bench, with the sensor side facing up.

2. Place the magnifying glass above the camera, with sufficient space to access the TCG and the adhesive

tapes with tools.

3. Take the spatula with one hand.

4. With the spatula, push the cover glass down to keep the sensor protected.

Keep pushing down with the spatula until step

Figure 20: Spatula pushing down the cover glass (schematic view)

5. Take the screwdriver with the other hand.

6. On the left side of the sensor, carefully push the tool tip of the screwdriver against the corner of the

adhesive tape until it starts to come off. Continue lifting up the corner, until pliers can get a grip.

Figure 21: Screwdriver lifting up the adhesive tape (schematic view)

7. Put the screwdriver aside and take the pliers.

8. Keep pushing down with the spatula until step

Tape

Glass

Bare pixel surface

Tape

Mount

Figure 19: Sensor with TCG (schematic view)

15.

Spatula

Adhesive tape

Cover glass

Mount

15.

Page 13 of 18

Preparing Cameras without

Screwdriver

Sensor Cover Glass