Award PM60 Çalıştırma ve Kurulum Talimatları - Sayfa 5

Hob Award PM60 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Award PM60 13 sayfaları. Built-in vitroceramic hob

Installation Warnings

- Do not operate the appliance before it is fully installed.

- The appliance must be installed by an authorized technician and put into use. The producer is not

responsible for any damage that might be caused by defective placement and installation by

unauthorized people.

- When you unpack the appliance, make sure that it is not damaged during transportation. In case of

any defect; do not use the appliance and contact a qualified service agent immediately. As the

materials used for packaging (nylon, staplers, styrofoam...etc) may cause harmful effects to children,

they should be collected and removed immediately.

- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain,

snow etc.

- The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of min

100°C.

- The temperature of the bottom surface of the hob might rises during the operation. Therefore, a board

must be installed underneath the product.

During usage

- Do not put flammable or combustible materials, in or near the appliance when it is operating.

- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of

extreme heating. Never pour water on to flames that are caused by oil. Cover the saucepan or frypan

with its cover in order to choke the flame that has occured in this case and turn the cooker off.

- Always position pans over the centre of the cooking zone, and turn the handles to a safe position so

they cannot be knocked or grabbed.

- If you will not use the appliance for a long time, plug it off. Keep the main control switch off. Also

when you do not use the appliance, keep the gas valve off.

- Make sure the appliance control knobs are always in the "0" (stop) position when it is not used.

During cleaning and maintenance

- Always turn the appliance off before operations such as cleaning or maintenance. You can do it after

plugging the appliance off or turning the main switches off.

- Do not remove the control knobs to clean the control panel.

TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU

ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICE

AGENTS IN CASE OF NEED.