EarthWay EV-N-Spred C22HDS Montaj ve Kullanım Talimatları Kılavuzu - Sayfa 5
Serpme EarthWay EV-N-Spred C22HDS için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları Kılavuzu indirin. EarthWay EV-N-Spred C22HDS 6 sayfaları. Broadcast spreader
Ayrıca EarthWay EV-N-Spred C22HDS için: Montaj ve Kullanım Talimatları Kılavuzu (8 sayfalar), Montaj ve Kullanım Talimatları Kılavuzu (6 sayfalar)
Sayfayı Yazdır
16.
For normal operation both doors should be fully opened. To reduce flow to the left side,
partially or completely close the door over the rear (
right side, partially or completely close the door over the front (
doors for a narrow center spread pattern.
WARNING: If the optional side deflector is being used in the down position, the plate over
the rear (
) hole MUST BE CLOSED or an over application of material will occur.
LARGE
For additional information on this feature, please visit www.earthway.com/pdf%20files/
Spredguide.PDF or look for Spread Guide under the Manuals section on
www.earthway.com
The settings furnished on the Setting Matrix are intended as a guide only. Variations in physical characteristics of material applied, walk-
ing speed, and roughness of ground surface may require slightly different spreader settings. Due to these conditions,
Inc. makes no warranty as to the uniformity of coverage actually obtained from the settings listed.
WARRANTY
EarthWay
guarantees this product to be free of defects in original
workmanship and materials for a period of 90-days from sale to the
original user. If any defect develops during this period
will repair or replace this product at no charge provided the defect
is not the result of mishandling or tampering and that this product is
received at the factory with shipping charges prepaid. For quicker
EarthWay
service you may call
0671, or email at [email protected] and describe the nature of
the defect and we will send repair parts to you.
Due to the corrosive nature of most fertilizers and ice melters,
EarthWay
Products, Inc. makes
against corrosion failure. Clean and dry your spreader thoroughly
after each use. Warranty covers parts only, not any labor charges to
replace or repair your spreader.
D
N
R
O
OT
ETURN
EARTHWAY PRODUCTS, INC.
1009 Maple Street
P.O. Box 547
Bristol, IN 46507
FOR YOUR RECORDS
Date Purchased
Store Name
) hole. To reduce flow to the
LARGE
EarthWay
at (574)848-7491 & 800-294-
or
NO WARRANTY
GUARANTEE
T
D
O
EALER
) hole. Close both
SMALL
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of this
spreader.
Obtain proper setting for material to be used from the en-
closed S
ETTING
our web site under the M
Move stop bolt on rate gauge assembly to the proper setting.
While pushing spreader forward, pull control lever back to
stop bolt.
To stop, push lever forward to close flow holes before you
stop moving.
When finished, empty any remaining material from hopper.
Thoroughly wash spreader and allow to dry before storing. No
oiling is necessary.
Remove agitator when using Rock Salt to prevent damage to
the gearbox.
HOW TO ORDER SPARE PARTS
All spare parts listed may be ordered direct from EARTHWAY
PRODUCTS, INC. Be sure to give the following information
when ordering.
1. Model Number
2. Part Number
3. Part Description
Call (574) 848-7491 or email ([email protected])
EarthWay
M
included with this spreader, or from
ATRIX
S
.
ANUALS
ECTION
for current prices.
Products,
PAGE 5