EarthWay EV-N-SPRED C24HDS Montaj ve Kullanım Talimatları Kılavuzu - Sayfa 6
Serpme EarthWay EV-N-SPRED C24HDS için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları Kılavuzu indirin. EarthWay EV-N-SPRED C24HDS 9 sayfaları. Broadcast spreader
Ayrıca EarthWay EV-N-SPRED C24HDS için: Montaj ve Kullanım Talimatları Kılavuzu (10 sayfalar)
Sayfayı Yazdır
18.
rear (LARGE
for a narrow center spread pattern.
WARNING:
or an over application of material will occur.
SPREAD PATH
FULL Rate
The settings furnished on the Setting Matrix are intended as a guide only. Variations in physical characteristics of material applied, walking
speed, and roughness of ground surface may require slightly different spreader settings. Due to these conditions, Earthway Products, Inc.
makes no warranty as to the uniformity of coverage actually obtained from the settings listed.
Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a period of 5-Years to the end user
with the original purchase receipt. If a manufacturing non-conformance is found, Earthway Products, Inc. at its discretion will repair or
replace the part(s) or product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or
normal wear and tear as determined by Earthway. Earthway at its discretion may require that the part(s) or product be returned along with
the original purchase receipt at owners' expense for examination and compliance with the terms of this warranty. Do not return any product
574-848-7491, [email protected] or write to Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and describe the nature
of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty covers only the part(s) or product; any labor charges associ-
rosion or its effects. Clean and dry your spreader thoroughly after each use, as a preventative measure, coat all metal parts with a light oil or
silicon spray.
Obtain proper setting for material to be used from the enclosed SETTING MATRIX included with this spreader, or from our web site
under the MANUALS SECTION.
Move stop bolt on rate gauge assembly to the proper setting.
While pushing spreader forward, pull control lever back to stop bolt.
Thoroughly wash spreader and allow to dry before storing. Apply coating of light oil to help prevent corrosion.
If you use Rock Salt, remove agitator when using Rock Salt to prevent damage to the gearbox.
Earthway Products, Inc.
1009 Maple Street, PO Box 547
Bristol, IN 46507
For Your Records
Place of Purch
HALF Rate
(one pass)
5-YEAR LIMITED WARRANTY
OPERATING INSTRUCTIONS
Date Purchased
ase
(two passes)
Each adjustable port
All spare parts listed may be ordered direct from
Be sure to give the following information when ordering.
Call (574) 848-7491, 800-294-0671, or email: [email protected]
SMALL) hole. Close both doors
LARGE) hole MUST BE CLOSED
Both ports open
Both ports closed
has 8 positions
One port closed
HOW TO ORDER SPARE PARTS
EarthWay Products, Inc.
Model Number
Part Number
Part Description
for current prices.
-
PAGE 5