Christie 140-133108 Series Talimat Sayfası - Sayfa 16
Projektör Aksesuarları Christie 140-133108 Series için çevrimiçi göz atın veya pdf Talimat Sayfası indirin. Christie 140-133108 Series 17 sayfaları. Ultra short throw lens installation
Sayfayı Yazdır
3. To remove the lens, with the screwdriver press the Lens Release button (shown below) and
rotate the lens counterclockwise by a quarter.
4. Remove the lens through the front of the projector.
5. If installing a non-ultra short throw lens in the projector:
a) Remove the new boresight adapter and install the original standard boresight adapter.
Repeat the steps in Replacing the boresight adapter (on page 4) in reverse order.
b) Install the non-ulra short throw lens.
c) From the on-screen display, select Configuration > Service.
d) Enter the Service password.
e) Click OK.
f)
Select UST Install > None.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
16