Christie UHD751-P Servis Kılavuzu - Sayfa 11

Endüstriyel Monitör Christie UHD751-P için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Christie UHD751-P 20 sayfaları.

Removing the LVPS board

Complete the following procedure to replace the low voltage power supply (LVPS).

1. Remove all sources of power from the display panel.

2. Remove the rear cover.

3. Mark and remove all connectors.

4. Using a Phillips #1 screwdriver, remove the six screws from metal plate covering the power

board and the three screws securing the power board to the display panel.

5. Replace the power board.

6. To install the replacement part, follow these steps in reverse order.

Learn how to remove and replace the main AD board.

1. Remove the rear cover.

2. Mark and remove all connectors.

3. Using a Phillips #1 screwdriver, remove the six screws securing the main AD board to the

display panel.

UHD751-P Service Guide

020-102686-01 Rev. 1 (01-2018)

Replacement procedures