Miele PW 6321 Kullanım Talimatları Kılavuzu - Sayfa 4
Yıkayıcı Miele PW 6321 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Miele PW 6321 46 sayfaları.
Ayrıca Miele PW 6321 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar), Programlama Talimatları Kılavuzu (48 sayfalar)
Warning and Safety instructions
Explanation of the Warning and
Safety symbols on the machine
It is essential to read these
operating instructions.
Please refer to specific
instructions, e.g. Installation
instructions
Caution, hot surfaces.
Caution, voltage up to 1000 volts.
Earthing
To avoid the risk of accidents and
damage to the machine read the
operating instructions carefully before
using it for the first time. They contain
important information about the
installation, safety, use and maintenance
of the machine. Keep these operating
instructions in a safe place and ensure
that new users are familiar with the
content. Pass them on to any future owner
of the machine.
Correct application
This machine is not designed for
washing items which have been treated
with dangerous or flammable substances.
Only use the machine to wash items
which are specified by the manufacturer
to be machine-washable on the wash-care
label.
Any other applications may be dangerous.
The manufacturer is not liable for damage
resulting from improper use or operation.
Chemical dry cleaning agents must not
be used in this machine. Most dry
cleaning agents, e.g. benzine, pose a fire
and explosion hazard.
4
Petrol, paraffin, or any easily flammable
liquid must not be stored or used near
the machine. Do not use the machine lid as
a storage shelf.
Fire and explosion hazard.
Do not store any chemicals on the
machine lid (liquid detergent, fabric
conditioners etc). They could discolour the
lid and also damage the surface finish. If
any chemicals should come in contact with
the surface, wipe them away immediately
with clean water. Then dry with a soft cloth.
When used in a commercial environment
ensure that all operators are trained to
use the machine correctly.
If the machine is used in a publically
accessible room, please ensure that
operators are able to use it safely.
This machine is not intended for outdoor
use.
Technical and electrical safety
The electrical safety of this machine can
only be guaranteed if connected to a
correctly installed earthing system on site. It
is most important that this basic safety
requirement is present and tested regularly,
and where there is any doubt, the on-site
electrical wiring should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the consequences
of an inadequate earthing system (e.g.
electric shock).
Do not damage, remove or bypass the
safety features, fixtures and control
elements of this machine.
Do not use a machine with damaged
controls or cables. These must be
repaired before it is used again.
Any removable outer panels must be
back in place, and all moving or
electrical parts shielded before the machine
is switched on.
M.-Nr. 06 572 495