Miele WS 5323 Kullanım Talimatları Kılavuzu - Sayfa 33

Yıkayıcı Miele WS 5323 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Miele WS 5323 36 sayfaları.

Installation

Plumbing

Connection to the water supply must be car-

ried out by a suitably qualified and competent

person in accordance with local and national

water and safety regulations (DVGW in Ger-

many) via a stopcock, (DIN 1988 approved in

Germany).

To ensure the machine is correctly connected

to the water supply and for drainage please

observe the installation diagram and the in-

stallation instructions supplied with the ma-

chine.

Water inlet / drainage

The inlet pressure hoses supplied with the

machine must be used for connection to the

water supply.

Before connecting the inlet hoses to the ma-

chine the filters and seals supplied in the ac-

cessory pack must first be fitted.

If replacing an inlet hose only use a hose able

to withstand a burst pressure of at least 70

bar, and a water temperature of at least 90°C.

This also applies to all connection parts.

Miele "Original" spare parts meet this require-

ment.

A water pressure flow rate of at least 1 bar,

maximum 10 bar is essential to ensure the

smooth operation of this machine.

Water taken into the machine must not ex-

ceed a temperature of 70°C.

Connection to cold water only

See the Installation diagram supplied.

Water connection Australia

To prevent back-syphonage, the water con-

nection must be via an approved Dual-Check-

Valve.

After installing and connecting the machine

to the services ensure that all outer panels

have been put back in place.

M.-Nr. 05730940