Miele G 2 Series Manuel - Sayfa 20

Bulaşık Makinesi Miele G 2 Series için çevrimiçi göz atın veya pdf Manuel indirin. Miele G 2 Series 46 sayfaları.
Ayrıca Miele G 2 Series için: Manuel (14 sayfalar)

Sayfayı Yazdır
Technical Information
Water Hardness [°d]
37 – 50
51 – 60
61 – 70

Table 12: Water Hardness Settings, G 1470/G 2470

Note:
If the dishwasher is connected to an external ion exchanger water softener (i.e.
that needs to be regenerated with salt), the water hardness delivered by the
system must be set. If this value is unknown, set to 8°d (8.6 grains per gallon).
2.5

Optima - G 1472/G 2472

Initial requirements:
1. Open the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the Program button.
2. Switch on the appliance.
3. Release the Program button.
4. Immediately press the Program button 5 times; on the 5th time, hold until
the "Rinse & Hold" LED flashes.
5. Release the Program button.
6. If the "Rinse & Hold" LED does not light up, repeat the procedure.
Acknowledgement indicator:
The "Rinse & Hold" LED flashes rapidly (5 flashes per second).
Options:
Function
Software version ID check
Reset
Water Hardness [gpg]
1
2
3
...
36
Programming
Do not press the options
button. The "Tab" LED is
off.
Press the options button
once. The "Tab" LED
flashes once quickly
intermittently. Press the
Program button to reset
all standard settings.
20
1.1
2.1
3.2
...
38.5
39.6 – 53.5
54.6 – 64.2
65.3 – 74.9
Display
The display shows the software
version ID no. in consecutive digits
(e.g., -818).
This programmable function can be
used to reset all modifiable
parameters to their standard
settings. The display shows p and a
digit alternately: p0 = Non-standard
settings have been made; p1 = All
settings reset to standard settings
or no modifications made.
G 1xxx/G 2xxx
Display
P1
P2
P3
...
P36
P50
P60
P70