Miele G 2 Series Manuel - Sayfa 30

Bulaşık Makinesi Miele G 2 Series için çevrimiçi göz atın veya pdf Manuel indirin. Miele G 2 Series 46 sayfaları.
Ayrıca Miele G 2 Series için: Manuel (14 sayfalar)

Sayfayı Yazdır

Technical Information

Function

Dispensed rinse aid

quantity setting

Resetting standard

settings

Adjusting the main wash

temperature

Shortening program

sequence

Water quantity

normal/increased

Second interim rinse

Activating/deactivating

improved drying

Appliance width setting

Programming

Press the Program (or

Delay Start for G 2143)

button 3x. Press the

Start/Stop button as

appropriate to make the

desired setting.

Press the Program (or

Delay Start for G 2143)

button 12x. Press the

Start/Stop button to

reset all standard settings.

Press the Program (or

Delay Start for G 2143)

button 20x. Press the

Start/Stop button as

appropriate to make the

desired setting.

Press the Program (or

Delay Start for G 2143)

button 22x. Press the

Start/Stop button as

appropriate to make the

desired setting.

Press the Program (or

Delay Start for G 2143)

button 23x. Press the

Start/Stop button as

appropriate to make the

desired setting.

Press the Program (or

Delay Start for G 2143)

button 26x. Press the

Start/Stop button as

appropriate to make the

desired setting.

Press the Program (or

Delay Start for G 2143)

button 27x. Press the

Start/Stop button as

appropriate to make the

desired setting.

Press the Program (or

Delay Start for G 2143)

button 35x. Press the

Start/Stop button as

appropriate to make the

desired setting.

G 1xxx/G 2xxx

Display

The "Rinse & Hold" LED flashes 3x

rapidly. If the "Rinse" LED flashes

3x rapidly, this corresponds to

standard setting of 0.1 fl.oz. (3 mL).

Range: 0 - 0.2 fl.oz. (0 - 6 mL); see

Table 23.

The "Rinse & Hold" LED flashes 1x

slowly and 2x rapidly. "Rinse" LED

is off: values do not correspond to

standard settings; "Rinse" LED

flashes: values correspond to

standard settings.

The "Rinse & Hold" LED flashes 2x

slowly. "Rinse" LED is off: standard

setting; "Rinse" LED flashes:

increased wash temperature.

Increased wash temperature results

in longer running time.

The "Rinse & Hold" LED flashes 2x

slowly and 2x rapidly. "Rinse" LED

is off: Standard setting; "Rinse" LED

flashes: Shortened wash program.

Program-dependent shortening of

running time by reduction of

temperature and/or removing

holding times.

The "Rinse & Hold" LED flashes 2x

slowly and 3x rapidly. "Rinse" LED

is off: Standard setting; "Rinse" LED

flashes: Increased water quantity. If

"Increased water quantity" is

selected, water intake increases by

approx. 16.7 fl.oz. (500 mL).

The "Rinse & Hold" LED flashes 2x

slowly and 6x rapidly. "Rinse" LED

is off: Standard setting; "Rinse" LED

flashes: With second interim rinse.

The "Rinse & Hold" LED flashes

2x slowly and 7x rapidly. "Rinse"

LED is off: Standard setting; "Rinse"

LED flashes: Improved drying –

depending on the program, drying

time is extended and the final rinse

temperature increased.

The "Rinse & Hold" LED flashes 3x

slowly and 5x rapidly. "Rinse" LED

is off: Appliance width 24" (60cm)

(standard setting); "Rinse" LED

flashes: Appliance width 18"

(45cm).