Miele G 2 Series Manuel - Sayfa 33

Bulaşık Makinesi Miele G 2 Series için çevrimiçi göz atın veya pdf Manuel indirin. Miele G 2 Series 46 sayfaları.
Ayrıca Miele G 2 Series için: Manuel (14 sayfalar)

Sayfayı Yazdır

G 1xxx/G 2xxx

Function

Softener sensor activation/

Water hardness setting

Dispensed rinse aid

quantity setting

Adjust Sensor Wash

program (ID nos. -984 and

later)

Resetting standard

settings

Adjusting the main wash

temperature

(ID nos. -984 and later)

Programming

Press the Delay Start

button 2x. The "Delay

Start" LED flashes 2x

quickly intermittently.

Press the Start/Stop

button as appropriate to

make the desired setting.

Press the Delay Start

button 3x. The "Delay

Start" LED flashes 3x

quickly intermittently.

Press the Start/Stop

button as appropriate to

make the desired setting.

Press the Delay Start

button 5x. The "Delay

Start" LED flashes 5x

quickly intermittently.

Press the Start/Stop

button as appropriate to

make the desired setting.

Press the Delay Start

button 12x. The "Delay

Start" LED flashes once

slowly and 2x quickly

intermittently. Press the

Start/Stop button to reset

all standard settings.

Press the Delay Start

button 20x. The "Delay

Start" LED flashes 2x

slowly intermittently. Press

the Start/Stop button as

appropriate to make the

desired setting.

Technical Information

Display

The "Rinse" LED is out or flashes.

The display shows p and the digit/s

of the set value alternately. p0 =

Softener sensor active. Hardness

setting range: p1 to p70; see Table

25.

The "Rinse" LED is out or flashes.

The display shows P and a digit

alternately: e.g., P3 (standard

setting) indicates a dispensed

quantity of 0.1 fl.oz. (3mL). Setting

range: 0 - 0.2 fl.oz. (0 - 6 mL).

The "Rinse" LED is out or flashes.

The display shows P and a digit

alternately. Setting options: P0 =

Standard program cycle (factory

setting); P1 = Adjusted program

cycle. The Sensor Wash program

can be adjusted in this parameter to

deal with stubborn soiling (if

otherwise low overall soiling). If this

option is selected, the main wash

temperature is increased to 131°F

and, as a result, the program

duration is extended.

The "Rinse" LED is out or flashes.

This programmable function can be

used to reset all customer-modified

parameters back to their standard

settings. The display shows P and a

digit alternately. P0 = Settings have

been modified; P1 = All settings reset

to standard settings or no

modifications have been made.

The "Rinse" LED is out or flashes.

The display shows p and a digit

alternately. Setting options: p0 =

Standard setting; p1 = Wash

temperature increased. If this option

is selected, the main wash

temperature is increased and, as a

result, the program duration is

extended.