Miele G 2 Series Manuel - Sayfa 37

Bulaşık Makinesi Miele G 2 Series için çevrimiçi göz atın veya pdf Manuel indirin. Miele G 2 Series 46 sayfaları.
Ayrıca Miele G 2 Series için: Manuel (14 sayfalar)

Sayfayı Yazdır

G 1xxx/G 2xxx

Function

Reset

Setting the language

Setting the time of day

Format

Set manually

Setting the detergent type

Dispensed rinse aid

quantity setting

Setting the intervals for

the filter checks

Adjust Sensor wash

program

Changing the main menu

Programming

Select Reset. To restore

the standard settings,

select OK. To return to the

main menu, press Back.

Select Language.

Select a language and

confirm with OK.

Select Time of day.

Select a submenu and

confirm with OK.

Choose 24- or 12-hour

setup and confirm with

OK.

Set the time (seconds,

then minutes) using the +

and - buttons and confirm

with OK.

Select Detergent type.

Select a detergent type

and confirm with OK.

Select Rinse aid. Select a

rinse aid quantity with the

+ and - buttons and

confirm with OK.

Select Check filters.

Select a wash interval and

confirm with OK.

Select Adjust sensor

wash. Select a setting and

confirm with OK.

Select Change main

menu. Select a wash

program for position 1,

press Continue, and do

exactly the same for

positions 2 and 3. After all

changes have been made,

confirm with Finished and

return to the main menu.

Technical Information

Display

The display reads Reset factory

default settings?

The display lists the languages that

can be selected. A language must

be selected in order to return to the

main menu.

The submenus Format and Set

manually can be selected.

Display of both clock formats.

Entry request is indicated.

The display shows the selection of

available detergent types: Normal

(powder detergent), 2 in 1, 3 in 1,

and Liquid detergent.

The display shows the current rinse

aid dispensing quantities: The

dispensed quantity can be set at

levels of approximately 0 - 0.2 fl.oz.

(0 - 6 mL). Standard setting: 0.1

fl.oz. (3mL).

The display shows the intervals

available for selection. Range: 30 -

60 wash cycles.

Setting options On and Off

(standard setting). With this

parameter, Sensor wash can be

adjusted for use against stubborn

stains (if overall soiling is

moderate). If this option is selected,

the main wash temperature is

raised to 131°F, resulting in an

extended running time.

The display shows the programs

available. The order of the first

three can be modified. After fixing

and confirming a new order, the list

is shown again.