Miele G 2150 Manuel - Sayfa 4

Bulaşık Makinesi Miele G 2150 için çevrimiçi göz atın veya pdf Manuel indirin. Miele G 2150 46 sayfaları.
Ayrıca Miele G 2150 için: Manuel (14 sayfalar)

Sayfayı Yazdır

Technical Information

Model

G 2142/G 2143/G 2120/

G 2140/G 2150

(See Sections 2.7 and 2.8 for

option descriptions.)

G 2420/G 243x

(See Section 2.9 for option

descriptions.)

Table 1: Customer Programming Summary

Service Programming

2.1

Inspira and Advanta - G 118x/G 2170/G 218x

Initial requirements:

1. Open the door.

2. Switch off the appliance.

Accessing:

1. Press and hold the Program button.

2. Switch on the appliance.

3. Release the Program button.

4. Immediately press the Program button 5 times; on the 5th time, hold until

the "Rinse & Hold" LED flashes (5 flashes per second).

5. Release the Program button.

6. If the "Rinse & Hold" LED does not light up, repeat the procedure.

Access Procedure

1. Press and hold Start/Stop button.

2. Switch on appliance and wait

approx. 4 sec. for "Start/Stop" LED

to light up.

3. Release Start/Stop button.

1. Press and hold Start/Stop button.

2. Switch on appliance and wait

approx. 4 sec. for "Start/Stop" LED

to light up.

3. Release Start/Stop button.

G 1xxx/G 2xxx

Available Options

Water hardness

Rinse aid

Reset standard settings

Check and set water

hardness (up to ID -1080);

activate/ deactivate

softener sensor, set water

hardness (after ID -1080)

Rinse aid

Adjust Sensor Wash

program (after ID -984)

Check water hardness

(after ID -1080)

Reset standard settings